Proper Installation of Apollo Headset Stem ScrewsUpdated 22 days ago

Proper Installation of Apollo Headset Stem Screws

Overview

This article explains how to correctly install the six screws that secure the headset to the stem on 2023 and newer Apollo models. Following these instructions will help you avoid damaging screw heads and ensure a secure fit.

Before You Begin

• Ensure you have all six screws provided with your Apollo headset.
• Have the appropriate screwdriver or tool for the screw type.
• Work in a well-lit area.

Installing the Six Headset Stem Screws

To prevent damage and ensure proper alignment, install the screws using the following steps:

1. Insert all six screws into their respective holes on the headset stem.
2. Loosely tighten each screw so that they are all partially threaded in, but not fully tightened.
3. After all six screws are in place and loosely tightened, gradually tighten each screw, alternating between them, until all are securely fastened.

💡 Tip: Installing the screws loosely at first allows for better alignment and prevents cross-threading or damaging the screw heads.

Troubleshooting

Issue: Screw Heads Become Damaged During Installation

Solution: Always insert all six screws loosely before fully tightening any of them. If a screw head is already damaged, replace it with a new one and follow the correct installation sequence.

If you encounter issues with these steps, please contact support.

Need More Help?

If you have any questions or concerns, please don't hesitate to contact our A-Team at [email protected]