Apollo Servicing & Support Center

The following maintenance table should be used to determine when to inspect certain parts of the scooter, when to change certain components, and when to re-torque specific bolts and fasteners

This maintenance table is specific to the Apollo Phantom V3 scooter and will be modified as needed. You can also find a copy of this maintenance table in the User Manual here.

How to read this maintenance table:

The column headers indicate how frequently you should check the component listed in the first shaded column. For example:

• You should check the tire pressure each ride

• You should ensure the wheel nuts are tightened every 50km

• You should ensure the fender screws are not coming loose every 500km

• You should perform a full inspection of the suspension every 1000km

For all of the screw and bolt tightening items in the maintenance guide, please refer to the screw charts below to find the one you are looking for.

Apollo Phantom 2023 Setup Guide
You can find instructions for most of the maintenance guide items here:

How To: Apollo Phantom Brake Adjustment

You can find instructions on how to ensure the brakes are properly adjusted here:

How To: Apollo Phantom Suspension Adjustment

You can find instructions here on how to grease the suspension pin:

How To: Replace the Fender on the Apollo Phantom

You can find instructions here on how to Ensure the fender screws are not coming loose. Refer to 2:00

How To: Apollo Phantom Inner Tuber and Tire Replacement

You can find instructions here on how to change the tires here: